LSM BILLET BLOCKS
-Same weight as cast aluminum, but
same power as cast iron.

-LSM billet blocks are true custom billet
blocks made to your specifications.

-Blocks can be Nikasil plated.
Our billet blocks are designed using the latest in CAD, CAM,
and other CAE software. Each block is given a full FEA
analysis before manufacture to ensure you get the lightest and
strongest block for your application. Rather than leaving thick
cross sections that add weight, our blocks have consistent,
thinned cross sections with ribbing added for strength. You
wont see this ribbing on our competitor's billet blocks, nor the
intricate machining. Our machining process takes a little
longer, but leaves proper generous fillets at every corner
rather than sharp edges. Our blocks are shipped ready to run,
with cylinders honed, lifter bushings finished, even the
crankcase can be clearanced for your crank/rod combination.
Raised cam small block ford w full
water jackets for endurance racing
Cross bolted 5" BBC
SBC w full water jackets
5.300 BBC
EXTREME BILLET BLOCK LINE
Our extreme billet block line starts at $5995 for the SBC and blocks are available in as little as 4
weeks. Our line is designed to provide maximum value for the customer. There are 4 blocks
available: a small block Chevy, big block Chevy, small block Ford, and big block Ford.
SBC

-9.025 Deck Height
-Standard lifter pattern
-.804 lifers. No bushings.
-Solid. No water
BBC

Bore Spacing available in:
4.840
4.900
5.000-std, .600, 1", 1.920" raised cam available
5.300-1.920" raised cam
Available in up to 12" deck height.
Up to 70mm cam/9 cam bearings
BBF

Bore spacing available in:
4.900
5.000
Std or 1.070 raised cam
Deck height up to 12"
Up to 70mm cam/9 cam bearings
ENDURANCE BILLET BLOCK LINE
SBF

Currently running in CORR off road truck.
Raised cam to BBF height. Fully enclosed
cam tunnel.
Deck heights up to 11"
Cam diameter up to 70mm/9 cam bearings
Accepts stock SBF & BBF components
Dry sump only.
Our endurance line is fully water jacketed and can be run in road racing, rally,
endurance racing or on the street with no cooling issues.
Viper V10

Fully water jacketed.
2nd or 3rd Gen timing cover.
Main galley moved for stroker clearance.
Up to 70mm cam bearings.
Fully enclosed Cam tunnel
Order an LSM Billet Block today
248-674-4967
LS1 Block

Solid or with water jackets.
Up to 500 cu in
18 bolt head pattern
LSM manufactured the first LS1 billet
block. Our solid block made over 2300 hp
and powered the worlds fastest LS1
powered car.
SBF

Bore Spacing available in:
4.380
4.500
Std, 1.275, or 2.350" raised cam
Solid or with water jackets.
Billet Block Tech Sheet  (pdf16k)